Loadrite L2180 - 6.0 Operation Modes

6.0 Operation Modes
6.0 Operation Modes
The operation modes that are available depend on the modes selected at installation.
TheLoadriteIndicatorcanbeoperatedindifferentmodes:
Mode Description
Total Thisisthenormalmodeofoperation.Asloadsareadded,theweights
areaddedtothetotals.Theshorttotalisdisplayed.
Target Inthismode,atargetweightisenteredintotheIndicatorbeforeloading.
Asloadsareadded,theremainingvaluetoreachthetargetisdisplayed.
Batch
Batch modeallowstheweighingandloadingofdifferentproducts
accordingtoapredefinedrecipethatspecifiestherequiredproportions.
Thegrandbatchtargetisenteredbeforeloading.TheLoadriteIndicator
willworkoutindividualproductweightsneeded.
Blend
Blend modeallowsafixednumberofloadsofdifferentproducts,
accordingtoapredefinedrecipe
Mix
Thismodeissimilarto Batch modeexceptthatthegrandtargetisnot
required.Loadthefirstproducttoacertainamountandthe
LoadriteIndicatorwillworkouthowmuchoftheotherproductsare
requiredbasedonrelativequantitiesinthepredefinedrecipe.
Split Themodeusedwhenloadingamultipletrainwagonsoratruckwith
multipletrailerswhereindividualtotalsarerequiredforeachindividual
vehicle.Canbeusedwithin Total or Target modes.
Grand Total Thismodecreatesonegrandtotalusingshorttotalsforallproducts.This
canbeusedtoensurethatthetotalacrossallproductsdoesnotexceed
aspecifiedweight.
Loadrite L2180 loader scales | 39