Loadrite L2180 - 9.0 Delay Entry; Delay Entry

9.0 Delay Entry
9.0 Delay Entry
DelayReasonEntry functionality is only available if enabled during installation.
> Delay Entry
Thisfunctionisusedtodisplaythe DelayEntry screensothatyoucanrecordareasonforadelaytoweighing.
ThereasonsforthesedelayscanthenbeusedtogenerateareportusingLoadriteInsight.
Forinformationonautomaticallydetecteddelays,see"How do I enter a reason for a delay?"onpage25.
n
Eitheruse to toselectthereasonforthedelay,OR
n
Press or toscrollthroughthedelayreasons,thenpress toselectthereason.
NOTE – Ifareasonisnotselectedwithin10seconds,theOtheroptionwillbeautomaticallyselected.
ThedelaywillbesetandtheDelaymessagewilldisplayatthetopofthescreenuntilthenextbucketloadis
added.
Loadrite L2180 loader scales | 57