Loadrite L2180 - 11.0 Printing; 11.1 Automatic printing; 11.2 Printing on demand

11.0 Printing
11.0 Printing
The printing options that are available depend on options selected at installation.
DataontheLoadriteIndicatorcanbeprintedimmediately,orstoredininternalstoragefordelayedprinting.
Thereisnormallyenoughstorageforuptooneweek,dependingonusage.
11.1 Automatic printing
Dependingonyourconfiguration,variousweightdataisprintedeither:
n
when ispressedattheendofaload,or
n
when , , or ispressed.
Theinformationthatisprinteddependsonsettingsselectedatinstallation.Forfurtherinformation,contactyour
Loadritedistributor.
11.2 Printing on demand
TheLoadriteIndicatorhasarangeofoptionsforprintingdataimmediately.Printingoptionsareselectedfrom
the PrintMenu .
11.2.1 Print docket
> Print Menu > Docket
The PrintDocket functionprintsthepreviousload,whichismadeupofalldatastored(forexample,add,
subtract)betweenthelasttwoclearevents.Ifthedataisnotstored,itwillnotbeprinted.Forexample,ifthe
Indicatorisnotconfiguredtologaddevents,weightsaddedwillnotbeprinted.Thisfunctionrequiresinternal
storagetobeenabled.Allconfigurationofthisfunctionissetduringinstallation.
NOTE – Thisfunctionwillnotworkif Clear isnotusedasintended.Forexample,theoperatoris
loadingsandintoatruckandhalf-waythrough,asecondtruckarrives.Theoperatorswitchesproduct
torocksandstartsloadingthesecondtruck(withoutclearingthesandtotal).Whenthedocketis
printed,theaddedweightsofsandplustheaddedweightsandtotalofrockswillbeincluded.
11.2.2 Print Totals
> Print Menu > Totals
Thisfunctionprintsthetotalamountofeachproductloadedthatday(sincemidnight).
Loadrite L2180 loader scales | 60