Loadrite L2180 - 7.2 Stock pile tip-off

7.0 Advanced Weighing: Tip-Off
4.
Whentherequiredtruckloadweightisreached,press .
NOTE – YoucannotaddaweightwhiletheWait...messageisdisplayed.
5. Movethebucketawayfromthetruckanddumpanyremainingproduct.
7.2 Stock pile tip-off
Usingthismethod,theoperatordumpsproductfromthebucketuntilitcontainstherightamountforloadingonto
thetruck.
1. Lifttheloadinthenormalway.
TheIndicatorwilldisplaytheliftedweight.
2.
Press .
TheTip-Off Waitmessagewilldisplaybriefly.Thenthescreenwilldisplaytheamountinthebucketand
theshorttotal.
3. Rollthebucketpartiallyforward,dumpingtheproduct.
TheIndicatorwilldisplaytheweightinthebucketandthepotentialweightofthetruck.
NOTE – Donotraiseorlowertheliftingarmswhentipping,asthiswilladverselyaffectthelive
weightreading.Thebucketneedstoberolledbackforanaccurateweight.
4.
Keepdumpingtheproductuntilthedesiredweighthasbeenreached,thenpress .
NOTE – YoucannotaddaweightwhiletheWait...messageisdisplayed.
5. Tiptheproductfromthebucketintothetruck.
Loadrite L2180 loader scales | 55