Loadrite L2180 - 6.2 Batch Mode

6.0 Operation Modes
6.2 Batch Mode
Batch mode is only available if selected at installation.
Batch modeallowsproductstobeweighedandloadedaccordingtoapredefined recipe .Enterthetargetweight
ofthebatchandyourLoadriteWeighingSystemwillcalculatetheamountrequiredforeachproductinthe
recipe.Eachtimeaweightisadded,thetoloadvalueisreducedbythatweight.
Arecipecancontainuptotenproductsandincludestherelativeamountofeachproductinabatch.
Batch mode process
1.
Enter Batch mode.
2. Selectthecurrentrecipeorenteranewrecipeforthebatch.
3. Enterthetotaltargetamountforthebatch.
4. Selectaproductandweigheachbucket-loaduntiltheproducttargetisreached.
5. Repeatstep4foreachproductintherecipeuntilthebatchtargetisreached.
Example: Batch mode calculation
Arecipeofthreeproducts,theirproportionsandatotalloadof7000kg.TheLoadriteWeighingSystemwill
calculatetheamountofeachproductthatisrequiredforeachload.
Product Proportion Amount Calculated
Sand 4 4000kg
Gravel 2 2000kg
Pumice 1 1000kg

Total 7000kg
Asproductsareloaded,theLoadriteWeighingSystemmaintainsthetargetamountforeachproductinasimilar
wayto Target mode.Itispossibletochangefromoneproducttoanotheratanytimeinordertomixthe
products.
Whenin Batch mode,theIndicatordisplaysthetargetvalueforeachproductasitisweighed.
6.2.1 How do I enter Batch mode and select a
recipe for the batch?
1.
Press ,thenscrollifrequireduntilBatch Mode?isdisplayed.
2.
Press .
TheBatch Recipemessagewilldisplay.
Loadrite L2180 loader scales | 42