Loadrite L2180 - Print Volume Conversion Factors; Print Standby Message

11.0 Printing
11.2.10 Print Volume Conversion Factors
> Print Menu > Volume Conv
This printing option is only available if VolumeConversionFactors functionality
is enabled at installation.
ThisfunctionprintsoutalistofalltheproductconversionfactorsconfiguredintheLoadriteWeighingSystem.
Thisisnormallyonlyusedwhenthelisthasbeenupdated.
11.2.11 Print Standby Message
> Print Menu > Standby
TheLoadriteweighingsystemnormallydisplaystheservicecontactdetailsofyourlocalLoadritedistributor
whentheIndicatorisputinto Standby mode.ThesedetailscanalsobeprintedbyselectingPrint Standby.
Loadrite L2180 loader scales | 64