Loadrite L2180 - 13.11 Data List

13.0 Setup Menu
Option Description
Restore UploadsdatastoredontheDataModuletotheLoadriteIndicator.Thiscan
beusedtosharedatabetweenIndicators.
13.10 Data Edit
Allowsyoutoselectavalueforeachdatafield:
1.
Press .
The SetupMenu willdisplay.
2.
SelectData Edit,thenpress .
The DataEdit screenforthefirstdatafieldwilldisplay.
3.
Use or toselecttherequireddatavalueforthedatafield,thenpress .
The DataEdit screenforthenextdatafieldwilldisplay.
4. Repeatsteps2-3untildatavalueshavebeenselectedforalldatafields.
13.11 Data List
13.11.1 Adding a data value
NOTE – Datafieldvaluescanonlybeenteredusingspecific WesternLatin characters,suchasin
English.
1.
Press .
The SetupMenu willdisplay.
2.
SelectData List,thenpress .
The Edit? screenwilldisplay.
3. Completethefollowing:

If... Then...
youwouldliketoaddadata
valuetothedatafieldthatis
displayed
press .
youwouldliketoselecta
differentdatafield
press untiltherequireddatafieldisdisplayed,thenpress .
4.
Press .
The DataEntry screenwilldisplay.
Loadrite L2180 loader scales | 69