MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming with SPM
Page 2-66Upgrading the System
2
— When you upgrade from Release 4.0 to Release 6.1, you must
program the features listed in Table 2–12
, then the features listed in
Table 2–13
, then the features listed in Table 2–14, then the features
listed in Table 2–15
, then the features listed in Table 2–16.
— When you upgrade from Release 3.1 to Release 6.1, you must
program the features listed in Table 2–11
, then the features listed in
Table 2–12
, then the features listed in Table 2–13, then the features
listed in Table 2–14
, then the features listed in Table 2–15, then the
features listed in Table 2–16
.
— When you upgrade from Release 3.0 to Release 6.1, you must
program the features listed in Table 2–10
, then the features listed in
Table 2–11
, then the features listed in Table 2–12, then the features
listed in Table 2–13
, then the features listed in Table 2–14, then the
features listed in Table 2–15
, then the features listed in Table 2–16.
— When you upgrade from Release 2.0 or 2.1 to Release 6.1, you
must program the features listed in Table 2–9
, then the features
listed in Table 2–10
, then the features listed in Table 2–11, then the
features listed in Table 2–12
, then the features listed in Table 2–13,
then the features listed in Table 2–14
, then the features listed in
Table 2–15
, then the features listed in Table 2–16.
— When you upgrade from Release 1.1 to Release 6.1, you must
program the features listed in Table 2–8
, then the features listed in
Table 2–9
, then the features listed in Table 2–10, then the features
listed in Table 2–11
, then the features listed in Table 2–12, then the
features listed in Table 2–13
, then the features listed in Table 2–14,
then the features listed in Table 2–15
, then the features listed in
Table 2–16
.
— When you upgrade from Release 1.0 to Release 6.1, you must
program the features listed in Table 2–7
, then the features listed in
Table 2–8
, then the features listed in Table 2–9, then the features
listed in Table 2–10
, then the features listed in Table 2–11, then the
features listed in Table 2–12
, then the features listed in Table 2–13,
then the features listed in Table 2–14
, then the features listed in
Table 2–15
, then the features listed in Table 2–16.
Table 2–7. Programming Needed after Upgrade to Release 1.1
Feature Sequence
System language
6\V3URJUDP→More→/DQJXDJH→6\VWHP/DQJ
Extension language 6\V3URJUDP→More→/DQJXDJH→([WHQVLRQV
SMDR language 6\V3URJUDP→More→/DQJXDJH→60'5
Printer language 6\V3URJUDP→More→/DQJXDJH→3ULQWHU