Menu Hierarchy
Page B-1
B
MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
B
Menu Hierarchy B
The system programming menu hierarchy details the sequence of menu screens
that appear when you select the system programming options. The choice of an
option on the first menu screen leads to either a second menu screen or a data-
entry screen. A secondary menu screen may lead to still another menu screen,
and so on up to six screens, as shown in the following pages.
You can use the Inspect feature of system programming to display the telephone
or line/trunk numbers that are programmed with a specific feature. Inspect is
helpful when you must assign a feature to many lines/trunks or extensions and
you do not have a Direct Station Selector (DSS) attached to the system
programming console, or when you are programming using a PC with SPM.
Inspect can be used with the menu options on the following pages that have an
asterisk (*) next to them. To use Inspect in system programming, choose an
eligible option from the programming menu, and press Inspct or

.
To Next Page
Loading...
Need help?
General
