Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
General System Programming Sequence
Page G-3Identify System Operator Positions
G
Identify System Operator Positions G
■ Identify QCC system operator positions.
2QFSBUPS→3PTJUJPOT→4VFVFE&BMM
■ Identify DLC system operator positions.
2QFSBUPS→3PTJUJPOT→'JSFDU/JOF
Lines and Trunks G
■ Specify type of trunk on 400 or 800 GL/LS module.
/JOFT7SVOLT→/6*6'6
■ Identify dial signaling for loop-start/ground-start trunks.
/JOFT7SVOLT→77/6'JTD→2VUNPEF
■ Classify disconnect signaling reliability for loop-start trunks.
/JOFT7SVOLT→77/6'JTD→/6'JTDPOOFDU
■ Specify toll prefix requirements.
/JOFT7SVOLT→7PMM7ZQF
■ Specify Hold Disconnect interval.
/JOFT7SVOLT→More→+PME'JTDODU
■ Assign the QCC queue priority.
/JOFT7SVOLT→More→4&&3SJPS
■ Identify QCC operator to receive calls.
/JOFT7SVOLT→More→4&&2QFS
■ Assign trunks to pools.
/JOFT7SVOLT→3PPMT

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English