MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-293Auxiliary Equipment
3
Console Display/Instructions Additional Information PC
! Enter the line/trunk.
! Assign or remove the line/trunk assignment.
Select
(QWHU or
'HOHWH.
! Return to the System Programming menu.
Select
([LW.
Loudspeaker Paging 3
Use this procedure to identify the line/trunk jack reserved for connection of
loudspeaker paging equipment.
If you use equipment that rebroadcasts music or other copyrighted materials, you
may be required to obtain a copyright license from and pay license fees to a third
party (such as ASCAP or BMI). Magic on Hold requires no such license and can
be purchased from your Lucent Technologies dealer.
A maximum of three single-zone or multizone loudspeaker paging systems can be
connected to the system.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
to a line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
as a Remote Access line/trunk, and you cannot use its jack for Music on Hold or
maintenance alarm.
0XVLFRQ+ROG
If the line/trunk appears on the screen
(QWHUPXVLFRQKROGOLQH
and you want to remove the Music on
Hold assignment, go to Step 4.
'HOHWH
Dial or type:
Ã
%DFNVSDFH
Trunk number [
OOO
]
([LW (QWHU
Slot and port number [
sspp
]
Logical ID number
[
nnn
]
To Next Page
Loading...
Need help?
General
