Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-300Auxiliary Equipment
3
Console Display/Instructions Additional Information PC
!Save your entry.
Select
(QWHU.

!Return to the System Programming menu.
Select
([LW twice.

Maintenance Alarms 3
Use this procedure to identify the line/trunk jack that connects an external alerting
device that sounds or flashes when major maintenance problems occur.
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music on Hold.
Summary: Maintenance Alarms 3
Programmable by System Manager
Mode All, but in Hybrid/PBX mode, the line/trunk designated for the
maintenance alarm cannot be assigned to a line/trunk pool.
Idle ConditionSystem idle
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting Not Applicable
Valid Entries Line/trunk number
Inspect No
Copy Option No
Console Procedure
$X[(TXLS→0DLQW$ODUPV→Dial line/trunk no.→(QWHU→
([LW→([LW
PC Procedure

→→Type line/trunk no.→→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English