Programming Procedures
Page 3-1
3
MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
3
Programming Procedures 3
This chapter contains all of the procedures required for programming each of the
features and options that are available for the MERLIN LEGEND Communications
System.
Each of the procedures begins at the System Programming menu. Use one of the
methods shown below to display the System Programming menu.
■ At the console: Menu→6\V3URJUDP→([LW
■ At the PC or with SPM: Type
TQN→1→
Press any key
→→
Before you begin any of the procedures in this chapter, you should read and
understand all of the information presented in Chapter 1, “Programming Basics.”