Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-241PRI Facilities
3
Console Display/Instructions Additional Information PC
! Erase the current dial prefix (
n ).
! Enter the dial prefix.
Dial or type [n].
Ã
! Continue to assign the dial prefix to another table or go to Step 10.
Select
1H[W 
Return to Step 7. The next table is displayed on
Line 1.
!Save your entry.
Select
(QWHU.

!Return to the System Programming menu.
Select
([LW three times.

Special Services Tables 3
Eight tables provide for international calling and for operator-assisted calls.
Default tables include the special prefixes 0 and 00 for operator-assisted calls.
Dialed numbers are matched against entries in these tables for patterns (011,
010, 01, 00, 0, and 1); for operator assistance (operator-assisted, presubscribed
common carrier operator, and none); and for type of number (national or
international). Up to four digits can be deleted.
1HWZN6HOHFW7EO(QWU\ Y  x = number entered in Step 5
(QWHUGLDOSUHIL[
XVHIRUZLOGFDUG
O
%DFNVSDFH 1H[W
([LW (QWHU
Press Drop.
7/

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English