MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-543Automatic Route Selection
3
Console/Display Instructions Additional Information PC
! Enter a pool dial-out code of up to 3 digits on which to route calls.
! Continue to enter pool dial-out code(s) for another route or go to Step 5.
Select
1H[W.
Return to Step 3. The next route is
displayed on Line 1.
! Save your entry.
Select
(QWHU.
! Return to the System Programming menu.
Select
([LW twice.
Facility Restriction Level 3
Use this procedure to assign a Facility Restriction Level (FRL) to each route. The
FRL ranges from 0 (least restrictive) to 6 (most restrictive) and is used to restrict
user access to the route. The FRL assigned to extensions and remote access
users is the opposite of the FRL assigned to routes, where 0 is the most restrictive
and 6 is the least restrictive.
NOTE:NOTE:NOTE:
Pool routes must be programmed before you assign Facility Restriction
Levels.
Facility Restriction Levels are assigned to Tables 1 through 18. Tables 17 and 18,
the Default Toll and Default Local tables respectively, cannot be changed.
$563RRO
YY
Y
xx
= table number entered in Step 1
(QWHUSRROGLDORXWFRGH
x
= route number entered in Step 1
%DFNVSDFH 1H[W
([LW (QWHU
Dial or type [
nnn
].
Ã
To Next Page
Loading...
Need help?
General
