Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-618Data Features
3
Data Features 3
This section covers the programming procedure for analog multiline telephones
connected by a General-Purpose Adapter (GPA) to a data terminal and modem.
Other data programming procedures can be found in earlier sections of this book
(see Table 3–7
), with the exception of ringing options. See “Ringing Options” on
page 4–34 for information about ringing options.
Table 3–7. Other Data Programming Procedures
Procedure Location
Assign Trunks or Pools to
Data Workstations
“Assign Trunks or Pools to Extensions” on page
3–268
Copy Trunk Assignments “Copy Line/Trunk Assignments” on page 3–274
Assign Intercom or System
Access Buttons
“Assign Intercom or System Access Buttons” on
page 3–278
Pool Dial-Out Code
(Hybrid/PBX only)
“Pool Dial-Out Code” on page 3–317
Calling Restrictions “Calling Restrictions” on page 3–320
Copy Calling Restrictions “Copy Calling Restrictions” on page 3–322
Forced Account Code Entry “Forced Account Code Entry” on page 3–330
Ringing Options “Ringing Options” on page 4–34
Assign Data Hunt Group
Members
“Group Calling Member Assignments” on page
3–408
Assign Data Hunt Group
Trunks or Pools
“Group Calling Line/Trunk or Pool Assignments” on
page 3–411
Group Type “Group Type” on page 3–443 (choice restricted to
Automatic Log ln)

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English