MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-322Optional Extension Features
3
Console Display/Instructions Additional Information PC
! Select the appropriate restriction.
Press the button or function key next to your
selection.
! Continue to assign or remove restrictions from another extension or go to
Step 7.
Select
1H[W
Return to Step 5 to continue programming. The
next extension is displayed on Line 1.
! Save your entry.
Select
(QWHU.
! Return to the System Programming menu.
Select
([LW.
Copy Calling Restrictions 3
Use this procedure to copy calling restrictions, allowed lists, and disallowed lists.
Feature assignment must be completed for the “copy from” extension. These
features can then be copied to an individual extension or block of extensions with
identical calling restriction requirements.
If you are copying restrictions to a block of extensions and one of the extensions
in the block is in use, the display shows the
6WDWLRQ%XV\3OV:DLW message.
Copying for the rest of the extensions in the block is delayed until the busy
extension becomes idle. The number of the busy extension is not shown. If a DSS
is attached, the LED associated with the busy extension is on. If you exit instead
of waiting for the busy extension to become idle, copying for the rest of the
extensions in the block is canceled; however, the restrictions that have already
been copied are not canceled.
If you are copying restrictions to a block of extensions, they must be sequentially
numbered.
([WHQVLRQ
YYYY
xxxx
= number entered in Step 3
6HOHFWRQH
8QUHVWULFWHG
8QUHVWULFWHG = remove all restrictions.
2XWZDUG5HVWULFW
2XWZDUG5HVWULFW = restrict extension
7ROO5HVWULFW
from making outside calls (local and toll).
1H[W
7ROO5HVWULFW = restrict extension from
([LW (QWHU
making toll calls.
To Next Page
Loading...
Need help?
General
