Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-320Optional Extension Features
3
Calling Restrictions 3
Use this procedure to change individual extension calling restrictions to one of the
following:
■ Unrestricted
■ Restricted from making all outgoing calls
■ Restricted from making toll calls
!
SECURITY ALERT:
Toll fraud can occur if extensions are not properly restricted. See “Security
of Your System: Preventing Toll Fraud” on page A–9 in Appendix A for more
information and security procedures.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, outward and toll calling restrictions are
automatically removed when a caller dials an extension in the non-local dial
plan. FRL restrictions still apply. For details, see “Uniform Dial Plan
Routing” on page 3–565.
Summary: Calling Restrictions 3
Programmable by System Manager
Mode All
Idle Condition Extension idle
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Unrestricted
Valid Entries Unrestricted, Outward restricted, Toll restricted
Inspect No
Copy Option Yes
Console Procedure
([WHQVLRQV→5HVWULFWLRQ→Dial ext. no.→(QWHU→ Select
restriction
→(QWHU→([LW
PC Procedure

→→Type ext. no.→→Select restriction→
→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English