MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-17Basic System Operating Conditions
3
Console Display/Instructions Additional Information PC
! Erase the current system date (
xxxxxx
)
.
! Enter six digits for the current date.
Dial or type [
mmddyy
]. Ã
! Save your entry.
Select
(QWHU.
! Return to the System Programming menu.
Select
([LW
Set System Time 3
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports.
NOTES:
1. If you are planning to use the SMDR feature, make sure the system time
is set accurately. If you change the system time while the system is in
Night Service mode, Night Service is deactivated and must be manually
reactivated. If you have installed applications such as MERLIN LEGEND
Mail or Intuity AUDIX, you may need to set the time in the applications
software whenever you reset the system time.
2. In Release 6.0 and later systems, where a MERLIN LEGEND
Communications System is networked in a private network with one or
more MERLIN LEGEND Communications Systems or with one or more
DEFINITY Communications Systems, SMDR reports may report
outgoing calls using more than one call record (especially for tandem
calls), depending upon how SMDR is programmed and how calls are
routed. Therefore, ensure that the system date and time are set
accurately on each system that carries these calls. When you examine
records for network calls, you may need to be aware of time zone
differences among different system locations.
'DWH
(QWHUPRQWK
'DWH<HDU
YYYYYY
%DFNVSDFH
([LW (QWHU
Press Drop.
7
+
I
To Next Page
Loading...
Need help?
General
