Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-28System Renumbering
3
Console Display/Instructions Additional Information PC
! Enter the old extension for the item selected (****) in Step 4.
! Save your entry.
Select
(QWHU.

! Enter the new extension.
! Save your entry.
Select
(QWHUor

1H[W.

If you use
1H[W to renumber the next item ()
displayed on Line 1, return to Step 7.
! Return to the System Programming menu.
Select
([LW two times.


If you get the Station Busy message, wait
(QWHUROGQXPEHU
for an idle connection, or exit system
programming and try again later.
%DFNVSDFH
([LW (QWHU
SP: “Entering an Extension”
 YYYY  
**** = item selected in Step 4
(QWHUQHZQXPEHU
xxxx = extension entered in Step 5
%DFNVSDFH 1H[W
([LW (QWHU
SP: “Entering an Extension”
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English