Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-59Lines and Trunks
3
Console/Display Instructions Additional Information PC
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW.

Second Dial Tone Timer 3
Use this procedure to program the second dial tone timer. The second dial tone
timer sets a delay in providing a dial tone after a star code is dialed to obtain
special services from the central office. See the
Feature Reference for information
about programming the second dial tone timer to prevent toll fraud. The second
dial tone timer is available only in Release 3.1 and later.
Summary: Second Dial Tone Timer 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting 0 ms
Valid Entries 0–5,000 ms, in increments of 200 ms
Inspect No
Copy Option No
Console Procedure
2SWLRQV→More→6HF'7→Drop→Dial second dial tone
timer value
→(QWHU→([LW
PC Procedure

→→→7
+
→Type second dial tone
timer value
→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English