Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-103Uniform Dial Plan Facilities
3
● Single Trunk Procedure
Console/Display Instructions Additional Information PC
! Specify a single trunk identifier.
Select
6Z1XP6LQJOH.

! Enter the number of the line/trunk.
! Save your entry.
Select
(QWHU.

! Enter the switch identifier (
nn = Null, 1–20, 21–40, 41–50, 51–60).
! Assign or remove a switch identifier.
Select
(QWHU or

'HOHWH (to return to Step 2) or

1H[W(to return to Step 4).

You may continue to assign or remove switch
identifiers from additional lines/trunks by
repeating Steps 2 through 4.
! Return to the System Programming menu.
Select
([LW three times.

8'36ZLWFK1XP6LQJOH
(QWHUWUXQNQXPEHU
%DFNVSDFH
([LW (QWHU
Dial or type [ nnnn ].
Ã
6Z1XP6LQJOH7UXQN[[[[
xxxx = trunk number entered in Step 2.
(QWHUVZLWFKQXPEHU
+HOS 'HOHWH
%DFNVSDFH 1H[W
([LW (QWHU
Dial or type [ nn ].
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English