Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-134DS1 Facilities
3
Console/Display Instructions Additional Information PC
! Save your entry.
Select
(QWHU.

! Select Signaling.
! Select the type of signaling.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW twice.

Line Compensation 3
Use this procedure to specify the amount of cable loss in decibels. Cable loss is
based on the length of cable between the 100D module and the Channel Service
Unit, as shown below:
■ 1 = 0.6 dB loss
■ 2 = 1.2 dB loss
■ 3 = 1.8 dB loss
■ 4 = 2.4 dB loss
■ 5 = 3.0 dB loss
'66ORW YY 
xx = slot number entered in Step 3
0DNHDVHOHFWLRQ
7\SH /LQH&RPS
)UDPH)RUPDW &KDQQHO8QLW
6XSSUHVVLRQ
6LJQDOLQJ
([LW

6LJQDOLQJ'66ORW YY 
xx = slot number entered in Step 3
6HOHFWRQH
5REEHG%LW
&RPPRQ&KDQQHO is used for tandem PRI
&RPPRQ&KDQQHO
trunks.
Select
5REEHG%LW or

([LW (QWHU
&RPPRQ&KDQQHO.


Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English