Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-154Tie Trunks
3
Console Display/Instructions Additional Information PC
! Assign or remove remote dial tone.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove remote
dial tone from additional lines/trunks by repeating
Steps 2 and 3.
! Return to the System Programming menu.
Select
([LW three times.

◆ Block Procedure
Console Display/Instructions Additional Information PC
! Specify the block of 20 lines associated with the 20 buttons
on the system programming console.
Select
/LQHV 
/LQHV 
/LQHV 
/LQHV 
! Specify remote or local dial signaling for each block.
Toggle the green LED on or off as required.
On = remote dial tone
Off = local dial tone
! Return to the System Programming menu.
Select
([LW three times.


Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English