Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-167DID Trunks
3
Console Display/Instructions Additional Information PC
! Save your entry.
Select
(QWHU.

! Specify immediate-start or wink-start.
! Continue to specify trunk type for the other trunk block or go to Step 8.
Select
1H[W.

Return to Step 6. The next trunk is
displayed on Line 1.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW twice.

Disconnect Time 3
Use this procedure to specify the DID trunk disconnect time limit in milliseconds.
Summary: Disconnect Time 3
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3d, Incoming Trunks: DID
Factory Setting 500 ms
Valid Entries 10 to 2,400 ms, in increments of 10 ms
Inspect No
Copy Option Yes
','%ORFN Y 
x = block number entered in Step 4
6HOHFWW\SH
,PPHG
:LQN
1H[W
Select ,PPHG or

([LW (QWHU
:LQN.


Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English