Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-279Extensions
3
Shared SA buttons cannot be assigned to single-line telephones or other
tip/ring equipment connected to an 016 T/R, 012 T/R, or 008 OPT module.
Shared SA buttons can be assigned to a tip/ring or external alert device
connected to an MFM in an MLX telephone or a GPA connect to an analog
multiline telephone. Shared SA buttons cannot be assigned when the
corresponding SA button is on a single-line set.
Release 3.0 and later
Each System Access Ring or Voice on an individual extension can be
assigned as a Shared System Access (SSA) button on up to 27 other
extensions.
System Access and Intercom buttons are centrally programmed and cannot
be programmed by individual extension users.
Summary: Assign Intercom or System Access
Buttons 3
Programmable by System Manager
Mode All, but note differences in factory settings
Idle Condition Extension idle
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjuncts: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct (DLC)
Data Form 1a, Modem Data Workstation
Data Form 1b, ISDN Terminal Adapter Data Workstation
Factory Setting Key Mode. An Intercom Ring (ICOM Ring), an Intercom
Voice (ICOM Voice), and the first eight lines connected to the
system are assigned to all analog multiline and MLX
telephones, excluding operator positions. Two Intercom Ring
buttons are assigned to tip/ring equipment connected on an
012 T/R or 016 T/R module. An Intercom Ring and an
Intercom Originate Only (ICOM Orig Only) button are
assigned to tip/ring equipment connected by an MFM. No
outside lines are assigned.
Behind Switch Mode. An Intercom Ring, an Intercom Voice,
and a prime line button are assigned to all analog multiline
and MLX telephones, excluding operator positions. Two
Intercom Ring buttons and a prime line button are assigned
to tip/ring equipment connected to an 012 T/R module. An
Intercom Ring and an Intercom Originate Only Ring button
are assigned to tip/ring equipment connected by an MFM. No
outside lines are assigned.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English