Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-284Extensions
3
Console Display/Instructions Additional Information PC
! Enter the programming code for voice or ring button.
! Assign a voice or ring attribute.
To assign the voice attribute to the Ring button,
select the same button and enter the
programming code for voice (see Table 3–6
).
To assign Voice buttons, first assign the button
as a Ring button, then program the button with
the voice attribute (see Table 3–6
).
! Repeat Step 6 to program another button for the extension entered in Step 1 or
go to Step 9.
! Save your entry.
Select
(QWHU.

!Return to the System Programming menu.
Select
([LW two times.

◆ Copy Extension Procedure
Console Display/Instructions Additional Information PC
! Enter the extension to copy from.

 =contents of button selected in
3UHVV+20(WR([LW
Step 5 (Voice, Ring, or blank)
'HOHWH 3DJH
3DJH
See Table 3–6.
Ã
6\V3URJUDP /LVW)HDWXUH
([WHQVLRQ3URJUDP&RS\
(QWHUH[WHQVLRQWRFRS\
IURP
%DFNVSDFH
([LW (QWHU
SP: “Entering an Extension”
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English