Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-288Extensions
3
Analog Multiline Telephones with Voice
Announce to Busy 3
Use this procedure to dedicate a voice or voice pair to be used to provide the
Voice Announce to Busy feature on an analog multiline telephone.
The extension number associated with the first (odd-numbered) extension jack in
the pair is the telephone’s extension number. The extension number for the
second (even-numbered) extension jack is dedicated to the Voice Announce to
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data workstations.
NOTE:NOTE:NOTE:
This procedure does not apply to MLX telephones (Voice Announce to Busy
is automatically provided) and cannot be programmed for single-line
telephones.
Summary: Analog Multiline Telephones with
Voice Announce to Busy 3
Programmable by System Manager
Mode All
Idle Condition System idle
Planning Form Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC)
Analog Data Form 1a, Modem Data Workstation
Factory Setting Not applicable
Valid Entries Extension numbers
Inspect Yes
Copy Option Yes
Console Procedure
([WHQVLRQV→9RLFH6LJQO→Dial ext. no.→(QWHU→
([LW→([LW
PC Procedure

→→Type ext. no.→→→
NOTE:NOTE:NOTE:
“Data Features” on page 3–618
provides information about analog multiline
telephones in data workstations.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English