Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-304Auxiliary Equipment
3
Console Display/Instructions Additional Information PC
! Erase the current interval setting (
x ).
! Enter the number of rings before calls are transferred to the backup position
(
n = 0 to 9).
Use 0 to specify that unanswered calls are not transferred to backup position.
Dial or type [
n ]. Ã
! Save your entry.
Select
(QWHU.

! Select Touch-Tone Duration.
! Erase the current touch-tone duration setting (
xxx ).
9067UDQVIHU5WQ,QYHUYO
(QWHUUHWXUQLQWHUYDO

[
%DFNVSDFH
([LW (QWHU
Press Drop.
7
+
I
906$$
If you do not want to change the current
0DNHDVHOHFWLRQ
setting for touch-tone duration, go to
7UDQVIHU5WQ
Step 11.
77'XUDWLRQ
77,QWHUYDO
([LW

7RXFK7RQH'XUDWLRQ
(QWHUGXUDWLRQOHQJWK
PVLQFUHPHQW
[[[
%DFNVSDFH
([LW
Enter Press Drop.
7
+
I

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English