Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-342Optional Extension Features
3
Console/Display Instructions Additional Information PC
! Erase the current number of delay rings (x).
! Enter the number of delay rings.
! Save your entry.
Select
(QWHU or

1H[W

If you select
1H[W to assign a forwarding delay to
the next extension in a sequence, repeat
Steps 6 and 7.
! Return to the System Programming menu.
Select
([LW twice.

Trunk-to-Trunk Transfer 3
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), calls can be
transferred to members in the non-local dial plan tables, even if trunk-to-
trunk transfer is not allowed. This allows users of single-line telephones to
transfer incoming calls from the PSTN to non-local dial plan extensions.
([WHQVLRQ YYYY 
xxxx = extension entered in Step 4
(QWHU'HOD\5LQJV
Y
%DFNVSDFH 1H[W
Press Drop or
7/
([LW (QWHU
Backspace.

([WHQVLRQ YYYY 
(QWHU'HOD\5LQJV
Dial or type the number of delay rings:
Ã
Y
You may use backspace to delete
%DFNVSDFH 1H[W
the last digit entered.
([LW (QWHU

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English