Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-355Optional Extension Features
3
Console/Display Instructions Additional Information PC
! Select HotLine.
! Specify the extension.
! Assign or remove HotLine from the extension entered in Step 4.
Select
(QWHU to allow HotLine operation or

'HOHWH to disallow HotLine operation.

You may continue to assign or remove HotLine
operation from additional extensions by
repeating Steps 4 and 5.
! Return to the System Programming menu.
Select
([LW twice.

([WHQVLRQV!
0DNHDVHOHFWLRQ
7UN7UDQVIHU 6HUYLFH2EV
&RYHU'HOD\
+RW/LQH
'LVSOD\3UHI
([LW

+RW/LQH([WHQVLRQV
If no DSS is attached:
(QWHUH[WHQVLRQV
SP: “Entering an Extension”
Ã
If DSS is attached:
'HOHWH
Toggle the red LED on or
%DFNVSDFH
off as required. Go to Step 6.
([LW (QWHU
On = HotLine is enabled.
Off = HotLine is disabled.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English