Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-410Optional Group Features
3
Console/Display Instructions Additional Information PC
! Select Members.
! Enter the extension number of the calling group.
! Save your entry.
Select
(QWHU.

! Specify the extension.
! Assign or remove the extension from the calling group.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove
extensions from the calling group by
repeating Steps 7 and 8.
*URXS&DOOLQJ!
0DNHDVHOHFWLRQ
+XQW7\SH 4XHXH$ODUP
'HOD\$QQFH ;WQO$OHUW
*US&RYHUDJH 2YHUIORZ
0HVVDJH 0HPEHUV
([LW /LQH3RRO

*URXS&DOOLQJ
See “System Renumbering” on page 3–20
(QWHUH[WHQVLRQQXPEHU
for the factory setting for extension
RIJURXS
numbers assigned to calling groups.
If a non-local extension number is entered
%DFNVSDFH
xxxx is displayed. xxxx = the non-local
([LW (QWHU
extension number.
Dial or type [
nnnn ].
Ã
*URXS&DOOLQJ YYYY 
xxxx = number entered in Step 5
(QWHUJURXSPHPEHUV
If no DSS is attached:
SP: “Entering an Extension”
Ã
'HOHWH
%DFNVSDFH 1H[W
If DSS is attached:
([LW (QWHU
Toggle the red LED on or
off as required. Go to Step 9.
On = extension is a member of the calling group.
Off = extension is not a member of the calling
group.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English