MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-413Optional Group Features
3
Console/Display Instructions Additional Information PC
! Enter the extension of the calling group.
! Save your entry.
Select
(QWHU.
! Enter the line/trunk or pool number.
! Assign or remove the line/trunk or pool from the calling group.
Select
(QWHU or
'HOHWH.
You may continue to assign or remove
lines/trunks or pools from the calling
group by repeating Steps 7 and 8.
! Continue to assign the line/trunk or pool to another calling group
or go to Step 10.
Select
1H[W
Return to Step 7 to continue
programming. The next calling group is
displayed on Line 1.
!Return to the System Programming menu.
Select
([LW three times.
*URXS&DOOLQJ
(QWHUH[WHQVLRQQXPEHU
RIJURXS
%DFNVSDFH
([LW (QWHU
Dial or type [
nnnn
]
.
Ã
*URXS&DOOLQJ
YYYY
xxxx
= number entered in Step 5
(QWHUOLQHSRROQXPEHU
OOOO
Dial or type:
Pool number [
nn
]
Ã
'HOHWH
Line/Trunk number [
nnnn
]
%DFNVSDFH 1H[W
Slot and port number
[sspp
]
([LW (QWHU
Logical ID number
#
[nnn
]
To Next Page
Loading...
Need help?
General
