Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-420Optional Group Calling Features
3
Console/Display Instructions Additional Information PC
! Assign or remove a delay announcement device extension
from the calling group.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove
delay announcement device extensions
from the calling group by repeating
Steps 5 through 8.
!Continue to assign the delay announcement device extension
to another calling group or go to Step 11.
Select
1H[W 
Return to Step 7 to continue
programming. The next calling group is
displayed on Line 1.
!Return to the System Programming menu.
Select
([LW twice.

Group Calling Announcement Interval 3
Use this procedure to set the delay before the secondary announcement is played
and/or repeated.
Summary: Group Calling Announcement Interval3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting 0 (disabled)
Valid Entries 0-900 seconds
Inspect No
Copy Option No
Console Procedure
([WHQVLRQV→More→*US&DOOLQJ→'HOD\$QQFH→
Dial calling group ext. no.→$QQRXQFHPHQW,QWHUYDO→ Enter
the Announcement Interval
→(QWHU→([LW→([LW
PC Procedure

→→→→Type calling group ext. no.→
→Type the Announcement Interval→ →→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English