Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-440Optional Group Calling Features
3
Group Calling External Alert for
Calls-In-Queue Alarm 3
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches the programmed
Threshold 3.
Only one external alert device can be designated for each calling group. Since the
external alert signal is continuous, it is recommended that only light-type external
alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm 3
Programmable by System Manager
Mode. All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Not applicable
Valid Entries Extension number
Inspect No
Copy Option No
Console Procedure
([WHQVLRQV→More→*US&DOOLQJ→;WQO$OHUW→
Dial calling group ext. no.→(QWHU→Drop→
Dial ext. no. for alert→(QWHU→([LW→([LW
PC Procedure

→→→→Type calling group ext. no.→
→7
+
I→Type ext. no. for alert→→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English