Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-462System Features
3
Console/Display Instructions Additional Information PC
! Erase the current number of seconds (
xxx ).
! Enter the number of seconds before a parked call returns to the originator
(
nnn = 30 to 300).
Dial or type [
nnn ]. Ã
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW.

Delay Ring Interval 3
Use this procedure to specify the number of rings for the delay ring interval. The
delay ring interval is applied when a primary, secondary, or group cover button is
set to delayed ring.
NOTE:NOTE:NOTE:
This setting is for Release 4.0 and earlier systems. Use Primary Cover Ring
Delay and Secondary Cover Ring Delay for Release 4.1 and later systems.
Summary: Delay Ring Interval 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting 2 rings
Valid Entries 1 to 6 rings
Inspect No
Copy Option No
Console Procedure
2SWLRQV→'HOD\5LQJ→Drop→Dial no. of rings→
(QWHU→([LW
PC Procedure

→→7
+
I→Type no. of rings→→
&DOO3DUN5HWXUQ7LPH
(QWHUWLPHEHIRUHUHWXUQ
VHFLQFUHPHQW
YYY
%DFNVSDFH
([LW (QWHU
Press Drop.
7/I

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English