MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-496System Features
3
Console/Display Instructions Additional Information PC
! Specify the extension to assign to the allowed list.
! Assign or remove the extension from the allowed list.
Select
(QWHU or
'HOHWH.
You may continue to assign or remove the
allowed list from additional extensions by
repeating Steps 5 and 6.
! Continue to assign extensions to the next allowed list or go to Step 8.
Select
1H[W
Return to Step 5. The next Allowed List is
displayed on Line 1.
! Return to the System Programming menu.
Select
([LW twice.
$OORZ7R/LVW
Y
x
= list number entered in Step 3
(QWHUH[WHQVLRQVWROLVW
If no DSS is attached:
SP: “Entering an Extension”
Ã
'HOHWH
%DFNVSDFH 1H[W
If DSS is attached:
([LW (QWHU
Toggle the red LED on or
off as required. Go to Step 7.
On = allowed list is assigned.
Off = allowed list is not assigned.
To Next Page
Loading...
Need help?
General
