MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-521Remote Access Features
3
◆ Change Barrier Code Procedure
Console/Display Instructions Additional Information PC
! Enter the barrier code ID number (
nn
= 1 to 16).
! Save your entry.
Select
(QWHU.
! Erase the current code (
nnnn
).
! Enter a code of up to 11 digits [
N
= any combination of 0 to 9 and an asterisk (*)].
Dial or type [
N
]. Ã
! Continue to assign the code to another barrier code ID number or go to
Step 6.
Select
1H[W.
Return to Step 3. The next barrier code number
is displayed on Line 1.
! Save your entry.
Select
(QWHU.
! Return to the System Programming menu.
Select
([LW three times.
5HPRWH$FFVV %DUULHU&RGH
(QWHU%DUULHUFRGHQXPEHU
%DFNVSDFH
([LW (QWHU
Dial or type [
nn
].
Ã
%DUULHU&RGH
YY
xx
= barrier code ID number entered in
(QWHU\\GLJLWV
,
Step 1
FRGH
yy
= barrier code length
QQQQ
%DFNVSDFH 1H[W
([LW (QWHU
Press Drop.
7
+
To Next Page
Loading...
Need help?
General
