Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-554Automatic Route Selection
3
Console/Display Instructions Additional Information PC
! Continue to specify other digits for another route in the specified subpattern or
go to Step 9.
Select
1H[W.

Return to Step 6. The next route number
is displayed on Line 1.
! Save your entry.
Select
(QWHU.

!Return to the System Programming menu.
Select
([LW twice.

N11 Special Numbers Tables 3
Use this procedure to specify Facility Restriction Level (FRL) and/or digits that
must be added when emergency numbers in the N11 Special Numbers table are
dialed (for example, 411, 811, or 911).
Subpattern B, absorb, and pool routing cannot be programmed for the N11
Special Numbers tables.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, when routing for ARS Special Numbers
N11 calls from a private network switch that is not connected to the public
switched network, the private trunks must be assigned to the main pool
(factory set to 70). The local system must prepend the ARS access code of
the connected switch from which the calls will be directed to the public
switched network.
Summary: N11 Special Numbers Tables 3
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3g, Automatic Route Selection Default and
Special Numbers Tables
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option No

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English