Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-599Labeling
3
Console/Display Instructions Additional Information PC
! Enter a label for the extension.
Use
3XQFWXDWLRQ to toggle between letters and
punctuation.
Dial or type the label.
Ã
! Save your entry.
Select
(QWHU.

NOTE:NOTE:NOTE:

, not

.
Continue to label additional extensions by
repeating Steps 5 through 9.
!Return to the System Programming menu.
Select
([LW three times.

Lines or Trunks 3
Use this procedure to establish alphanumeric system labels for display telephone
users to identify the line or trunk being used.
Summary: Lines or Trunks 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option No
Console Procedure More
→/DEHOLQJ→/LQHV7UXQNV→Dial line/trunk no.→
(QWHU→Drop→Dial label→(QWHU→([LW→([LW
PC Procedure

→→→Type line/trunk no.→→7
+
I→
Type label→→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English