MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-627Memory Card
3
Memory Card Formatting 3
The memory card may have to be formatted before you begin any manual or
automatic backup procedures. This section details the screens and messages
that appear during the format procedure.
!
CAUTION:
!
CAUTION:
Formatting overwrites previous data on the memory card. Make certain that
there is no important information on the card before you begin formatting.
Unformatted Card 3
If you begin a backup procedure with an unformatted or incorrectly formatted card,
this screen appears.
The inserted memory card is not the correct type. You have the option of
formatting the memory card as a translation memory card or repeating the backup
procedure with a different memory card.
NOTES:
1. Only 4 MB Series I or Series II PCMCIA memory cards may be
formatted, except those already formatted as translation cards.
2. If a memory card cannot be formatted, a message appears on screen.
These messages are noted in the procedures as appropriate.
3. A memory card may need to be formatted if it is intended for use as a
translation card but is currently blank or contains data other than
MERLIN LEGEND Communication System backup files.
0HPRU\&DUG%DFNXS
,QVHUWHG0HPRU\&DUGLV
QRWWKHFRUUHFWW\SH
'R\RXZDQWLWIRUPDWWHG"
<HV
1R
([LW
To Next Page
Loading...
Need help?
General
