214880 11 Revision A
1.9 Understanding Safety Signs
NOTE:
This is a general list of safety sign definitions and the decals listed may not necessarily be applicable to your machine.
Figure 1.18: MD #113482
MD #113482
General hazard pertaining to machine operation and servicing.
CAUTION
• Read the operator’s manual, and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
• Do NOT allow untrained persons to operate the machine.
• Review safety instructions with all Operators annually.
• Ensure that all safety signs are installed and legible.
• Make certain everyone is clear of machine before starting
engine, and during operation.
• Keep riders off the machine.
• Keep all shields in place and stay clear of moving parts.
• Disengage drive, put transmission in Neutral, and wait for all
movement to stop before leaving operator’s position.
• Shut off engine and remove key from ignition before
servicing, adjusting, lubricating, cleaning, or unplugging
machine.
• Engage locks to prevent lowering of self-propelled rotary
disc header before servicing in the raised position.
• Use slow moving vehicle emblem and flashing warning lights
when operating on roadways unless prohibited by law.
Figure 1.19: MD #166832
MD #166832
Hydraulic pressure oil hazard
WARNING
• High pressure oil easily punctures skin causing serious injury,
gangrene, or death.
• If injured, seek emergency medical help.
• Do NOT use finger or skin to check for leaks.
• Lower load or relieve hydraulic pressure before loosening
fittings.
SAFETY
To Next Page
Loading...
