214880 147 Revision A
Figure 4.180: Inboard and Outboard Half of
Driveshield
3. Pull the outboard side (A) and inboard side (B) of
driveshield away from the header to remove.
4.10.2 Installing Driveshields
CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown in this procedure are for the left driveshield—the right driveshield is similar.
Figure 4.181: Inboard and Outboard Half of
Driveshield
1. Position outboard half (A) and outboard half (B) of
driveshield as shown.
MAINTENANCE AND SERVICING
To Next Page
Loading...
