214880 19 Revision A
Chapter 3: Operation
3.1 Break-In Period
After attaching the header to the windrower for the first time, operate the machine slowly for 5 minutes, watching and
listening from the operator’s seat for binding or interfering parts.
NOTE:
Until you become familiar with the sound and feel of your new header, be extra alert and attentive.
CAUTION
Before investigating an unusual sound or attempting to correct a problem, stop the engine, put the ground speed lever
(GSL) in PARK, and remove the key.
NOTE:
Perform the items specified in 4.3.2 Break-In Inspections, page 66.
To Next Page
Loading...
