214880 21 Revision A
Figure 3.3: Safety around Equipment
1. Check the machine for leaks or any parts that are missing,
broken, or not working correctly.
NOTE:
Use proper procedure when searching for pressurized fluid
leaks. Refer to 4.12.1 Checking Hydraulic Hoses and Lines,
page 151 .
2. Clean all lights and reflective surfaces on the machine, and
check lights for proper operation.
3. Perform all daily maintenance. Refer to 4.3.1 Maintenance
Schedule/Record, page 64.
OPERATION
To Next Page
Loading...
