214880 63 Revision A
Figure 4.4: Safety Equipment
• Be prepared if an accident should occur. Know where the first
aid kits and fire extinguishers are located, and know how to
use them.
Figure 4.5: Safety Around Equipment
• Keep the service area clean and dry. Wet or oily floors are
slippery. Wet spots can be dangerous when working with
electrical equipment. Be sure all electrical outlets and tools
are properly grounded.
• Use adequate light for the job at hand.
• Reinstall all shields removed or opened for service.
• Use only service and repair parts made or approved by the equipment manufacturer. Substituted parts may not meet
strength, design, or safety requirements.
• Keep machinery clean. Never use gasoline, naphtha, or any volatile material for cleaning purposes. These materials may
be toxic and/or flammable.
MAINTENANCE AND SERVICING
To Next Page
Loading...
