- 104 -
2002/95/CE
2002/96/CE
INFORMATION FOR USERS
concerning the terms of the National Legislation enforcing the Directives 2002/95/EC,
2002/96/EC and 2003/108/EN on the restriction of the use of certain hazardous substances
in electrical and electronic equipment, and the disposal of waste materials
The wheelie bin symbol with a cross through it on the equipment or its packaging indicates that the pro-
duct must be disposed of separately from other waste materials at the end of its working life.If the user
wishes to dispose of this equipment, he/she must do so in accordance with the applicable National regu-
lations governing the separation of the unit into its waste materials at the end of its working life. Separating
waste materials correctly before submitting the equipment for recycling, treatment and environmentally
compatible disposal can help to prevent potentially negative effects on health and the environment, as well
as making it easier to reuse and/or recycle its constituent materials. Failure to dispose of this product in
accordance with these indications is punishable in accordance with the applicable laws.
A full, up-to-date list of addresses is available at the official Marposs web site: www.marposs.com
D2101521SG – Edition 10/2013 – Details may change without prior notice.
© Copyright 2013 MARPOSS S.p.A. (Italy) – All rights reserved.
MARPOSS, and other names/signs relative to Marposs products, referred to or shown in this document are registered trade marks or tra-
de marks of Marposs in the United States and in other countries. Any third party rights relating to trade marks or registered trade marks
referred to in this document are recognised for the respective holders.
Marposs has an integrated Company Management system for quality, the environment and safety, with the fol-
lowing certification: ISO 9001, ISO 14001, OHSAS 18001 and QS9000 T&E. Marposs has also been awarded EAQF 94
and the Q1-Award.
To Previous Page