- 59 -
7.1 Personal Protocols
• MANUFACTURER: manufacturer’s name.
• N
AME: name allocated to the protocol.
• B
AUDRATE: communication speed expressed in bits per second (options: B300,
B600, B1200, B2400, B4800, B9600, B14400, B19200, B38400, B57600, B115200).
• P
ARITY: protocol parity (options: NONE, ODD, EVEN, MARK, SPACE).
• S
TOP BITS: NONE, ONE, ONE POINT FIVE, TWO.
• D
ATA BITS: 5,6,7,8.
• H
ANDSHAKE: NONE, XON/XOFF, RTS, RTS XON/XOFF.
• P
ORT BEHAVIOUR: NORMALLY CLOSED, ALWAYS OPEN.
• P
OWER SUPPLY ON RTS/DTR: if the box is ticked, the Merlin provides power
supply between RTS (-) and DTR (+) pins. A typical device that requires this
feature is the Mahr Millitast 1085.
The C
OPY function enables the user to create a new PERSONAL PROTOCOL starting from
an existing one .
NOTE: in order to access the information about the inputs handled by
a given protocol, select it from the list, tap “Copy” and view the inputs in
the “Serial Inputs” tab”. Tap “Exit” to quit.
NOTE:
we cannot guarantee the complete compatibility of the protocols
developed, to comunicate with these devices, due the continuous deve-
lopement performed by the manufactures of them. On demand we can
develop the protocol for a new serial device only if it is provided to us.
Please contact us for any other detail.
To Next Page
Loading...