marposs Merlin - Restore from Restore Point; Reset All

- 83 -
10.2.2 Restore from restore point
10.2.3 Reset all
This option permits the user to restore the system from a restore point that has
been saved at some earlier date in the local folder.
The third option - ‘Reset all’ - deletes all the archives and restores the Merlin to its
initial state. After carrying out this procedure it is necessary to reconfigure all the
devices and re-enter all the programs.
Select a Backup from the list and the entire path will be displayed in the text box
above the grid, at this point, tap ‘S
TART’ to restore all the archives.