- 58 -
7 PROTOCOLS
The “Serial Inputs” column displays the number of parameters handled by the
protocol and therefore the number of inputs which will be made available by cre-
ating a device which uses that protocol. The system is now capable of acquiring
measurement information from the following external devices/protocols.
MARPOSS
• Quick Digit Simplex • Quick Digit Duplex
• E4N single column (configurations with daisy-chained columns are not allowed)
• Quick Read (up to four daisy-chained units)
MG
• CS2-Linear
TESA
• Micro-Hite • Tesa Bi-directional
MAHR
• M1 Perthometer • MILLITAST 1083/1085 • Marcator Duplex
BOWERS
• Holematic
TAYLOR HOBSON
• Surtronic 25 (manual) • Surtronic 25 (automatic)
MITUTOYO
• SJ-201P roughness • SJ-210 roughness
BOBE
• HF-MS-M systems on devices for 4 and 8 channels
To Next Page
Loading...